+- Red Dot Arms Forum (https://rdaforum.com)
+-- Forum: The Gun Counter (https://rdaforum.com/forum-3.html)
+--- Forum: Shotguns (https://rdaforum.com/forum-8.html)
+--- Thread: Removing mag pul pull stock from mossberg 590a1 (/thread-97.html)
Removing mag pul pull stock from mossberg 590a1 - Kahootz - 06-25-2014
Hi! I have just bought a receiver end sling mount for my mossberg590a1 -problem is I can't figure out how to get the mag pul off ! And of course could not find anything online - plz help
RE: Removing mag pul pull stock from mossberg 590a1 - RJDSRT - 06-25-2014
Thanks for posting!
There should be a hidden plate on the top side of the stock, just below the safety. That will pop off, and reveal the screw where you will be able to use an allen wrench to remove the stock. If you have trouble with this, bring it on in to the shop and I will give you a hand!
RE: Removing mag pul pull stock from mossberg 590a1 - RJDSRT - 06-25-2014
For the regular 6 position, just remove the pistol grip, and then unscrew the castle nut. It should remove just like an AR stock at that point.
RE: Removing mag pul pull stock from mossberg 590a1 - Kahootz - 06-25-2014
Ok is there a pin or something else holding the stock on ? I do not own a AR - so after the pistol grip is off and castle nut is backed off does the buffer tube slide off or does it have to be spun off .